Devolo dLAN 1200+ WiFi ac - Manual (Page 32)

devolo cockpit 31
devolo dLAN 1200+ WiFi ac
Via the Updates button you can carry out automatic
firmware updates from our website,
www.devolo.com . This procedure requires an active
Internet connection.
4.2.1 Encrypting a network with
devolo Cockpit
If you use dLAN devices without an encryption but-
ton, data can be encrypted only via devolo Cockpit.
Before the networking procedure,
note the security IDs of all dLAN
adapters. This unique identifier of
each dLAN device is located on the
label on the housing. It consists of 4
x 4 letters separated by dashes (e.g.
ANJR-KMOR-KSHT-QRUV). Ensure
that all dLAN adapters are connected
to the power grid and computers or
other network components as appro-
priate.
Scan for local adapter
After devolo Cockpit is started, it searches for the dLAN
adapter connected directly to your computer first.
Adding an adapter
Add all the dLAN devices you want to your dLAN
network by selecting the Add adapter button. You
will need the 16-character security IDs of the adapters
from the label on the housing. Enter it now in the
Security ID field and confirm with OK. If a security ID
is correct and the device can be reached in the dLAN
network, it will be added to your network of configured
adapters and also displayed in the program.
Entering a network password
After you have added all the dLAN devices you want to
your dLAN network, select the Change password
button to assign a shared network password that will
apply for all registered adapters in your personal home
network.
You can choose between your own password, a ran-
dom password and the default password. To define
your own password with a length of at least eight char-
acters, enter this into the Network password text
field. Alternatively, you can have a randomly selected,
highly secure password assigned using the Generate
secure password button. Use the Factory default
password button to reset the dLAN adapter to the de-
fault password. Normally, the display of the password
is hidden for security reasons. If you enable the option
Show characters, the current password is displayed
in legible form in the text field.