Devolo dLAN 1200+ WiFi ac User Manual
Page 21
20 Initial use
devolo dLAN 1200+ WiFi ac
Integrating the dLAN 1200+ WiFi ac into an exist-
ing WiFi network
ቤ
Establish the WiFi connection with your laptop,
tablet or smartphone by entering the previously
noted WiFi key as the network security key.
For the dLAN 1200+ WiFi ac to show the same WiFi
configuration as your WiFi router, you can apply the
WiFi access data at the touch of a button. The WiFi
Clone function can be enabled in different ways:
Enabling WiFi Clone at the touch of a button
ብ
First press the encryption button with the
home icon on the front side of the
dLAN 1200+ WiFi ac and then press the WPS but-
ton on the WiFi router with the access data you
want to apply.
or
Enabling WiFi Clone via the configuration inter-
face. For more information about this function, refer to
Chapter 5 Network configuration
ı
ቦ
To integrate the dLAN 1200+ WiFi ac into an
existing WiFi network with devolo WiFi
devices of the 500 series (e.g. dLAN 500 WiFi
or dLAN 500 Wireless+), you have to transfer the
settings of your existing WiFi configuration man-
ually to the configuration interface of the
dLAN 1200+ WiFi ac.
For more information on the configuration in-
terface, refer to Chapter 5 Network configu-
ration.
3.3.2 Starter Kit and Single Kit – Setting
up a new dLAN network
ቢ
Connect the dLAN 1200+ to your Internet access
device's network jack.
ባ
Plug the dLAN 1200+ WiFi ac into a wall socket.
The adapter is ready to operate once the indicator
light of the encryption button with the home icon
turns white (after approx. 50 seconds).
To disconnect the adapter from the
mains supply, unplug the device. The
power outlet and all connected net-
work devices should be easily acces-
sible so that you can pull the mains
plug quickly if needed.
Connecting a dLAN 1200+ and a
dLAN 1200+ WiFi ac as a dLAN network
Before you can use the adapter in a dLAN network, first
you have to connect it as a network. This is accom-
plished by using a shared dLAN password. This forms