Dataprobe iBoot-IO - Manual (Page 2)

V150212E iBoot-IO Page 2
2.2. Inputs and Outputs
The screw terminal blocks are on removable connectors for easy cable fabrication. Follow the correct
diagram and table co-responding to the proper model.
Make sure screw terminals are tightened securely and that there are no loose strands of cable, or excessive
stripped wires.
2.3. Model iBoot-IO 1410037
 Default Power ON
 Dry Contact Control
iBoot-IO Function
O Feedback Output
High(Open) = Power OFF
Low (Ground) = Power ON
G Ground Common Ground
I Control Input
Open = Power ON
Ground= Power OFF
2.4. Model iBoot-IO-OFF 1410039
 Default Power OFF
 Dry Contact Control
iBoot-IO-OFF Function
O Feedback Output
High(Open) = Power OFF,
Low (Ground) = Power ON
G Ground Common Ground
I Control Input
Open = Power OFF
Ground= Power ON
2.5. Dry Contact Versions - Specifications
Input Relay Coil Sensitivity: 44mA @ 12 VDC
Output Transistor Rating: 100 mA 30 VDC Max.
Poor Screw Terminal
Connections.
Note Loose Wires and
Excessive Stripping
Proper Screw Terminal
Connections
Wiring Diagram for Dry Contact Versions
iBoot-IO and iBoot-IO-OFF