Dataprobe iBoot-WiFi Quick Start - Manual (Page 2)

iBoot‐WiFi Quick Start Guide v150113e
SSID iBootXXXX
Micro Access Point SSID:
Home/Office Network
Passphrase
Step 1
Connect to iBoot-WiFi Micro Access Point to
Step 2
Connect to YourNetwork to
Control Power andAdd Features
Laptop / Computer / Tablet / Phone
with WiFi and Browser
Operation
iBoot‐WiFi uses two username/password credential sets, one for power control only; User
and one that also provides access to the setup functions; Admin.
Role Username (fixed) Password (settable)
Administrator admin admin
User user user
Control Power
To control the power, click on the appropriate ON, OFF or Cycle Power button. During power cycling, the
Power Status bar will indicate the temporary status, with a blue background. Once the cycle is complete,
the status bar will revert to its original condition. To abort a power cycle, click on either Power On or Power
Off buttons. This page provides automatic updates every 1 second.
Additional Features
Read the complete manual to learn how to use all the features of the iBoot‐WiFi
 iBoot Cloud Service
 AutoPing
 Scheduling and Logging
 User & Security Management
Network Setup
Required: Computer, Tablet or Phone with WiFi and browser.
Name (SSID) and Passphrase of Local Network.
Step 1. Connect to iBoot‐WiFi Micro Access Point (Hotspot) to
set Local Network Address
Plug in and wait for blinking blue Network LED.
Connect device to WiFi hotspot iBootxxxx. Password is wifi‐admin
Open browser to 192.168.10.1
Login to iBoot with user: admin password: admin
Access WiFi Setup Page. From Home page click Setup. Then click Set‐WiFi
Select network desired. ( Click Scan Networks to update list )
Fill‐in Passphrase and click Connect. Wait for iBoot‐WiFi, 30 seconds, access network
WiFi Setup Page will re‐load with iP Address on the selected network under IP Settings.
Note this IP Address for Step 2.
Step 2. Connect via Local Network to
Configure and Operate iBoot‐WiFi.
Connect the computer to the WiFi Network selected for iBoot
Open browser and connect to IP Address from Step 1
Login to iBoot with user: admin password: admin
Congratulations. Now you can configure your iBoot and enjoy improved network
reliability.
Still need help? Watch the videos at
dataprobe.com/support_iboot‐wifi.html
WiFi Protected Setup (WPS) is also Supported. Press and Hold WPS pushbutton 7 Seconds to
initiate connection. Refer to the full manual and your router documentation for further details.