Daktronics DakStats WebTicker - Manual (Page 2)

DakStats WebTicker Quick Guide 2 of 3
201 Daktronics Drive PO Box 5128, Brookings, SD 57006
Tel: 605-697-4036 or 888-325-7828 Fax: 605-697-4700
Website: www.daktronics.com
DD1685707 Rev 0
25 September 2009
Speed controls are hidden by default. To add this control, enter
“&speedControls=yes” into the WebTicker URL:
http://www.dakstats.com/WebSync/Pages/WebTicker/WebTicker.asp
x?assocID=10&speedControls=yes
Click the up and down buttons to increase or decrease the scrolling speed.
The default dimensions are 200 x 200 pixels. To change these dimensions,
enter the “&height=” and “&width=” parameters into the WebTicker URL
with the desired values:
http://www.dakstats.com/WebSync/Pages/WebTicker/WebTicker.aspx?
assocID=10&height=300&width=350
Note: When using the default dimensions, the recommended size for an
iframe is
style =”height:229px; width:201px” to accommodate
the outside menus. For custom dimensions, be sure to add 29 extra
pixels to the height and 1 extra pixel to the width.
To specify a default scroll speed, enter the “&defaultSpeed=” parameter
into the WebTicker URL with the desired speed value:
http://www.dakstats.com/WebSync/Pages/WebTicker/WebTicker.aspx?
assocID=10&defaultSpeed=2
Note: The minimum speed is 0 (stopped) and the maximum speed is 5.
The speed is set to 1 by default.
200 px
(WebTicker
active height) 229 px
(iframe total
height)