Daktronics E SERIES User Manual
Page 15
16
hoist Setup & Debug
The Hoist Setup & Debug screen allows the system
administrator to set target heights for each individual hoist,
label each hoist with a unique name (Figure 15), set
acceleration and deceleration (Figure 16), as well as speed
parameters, enable/disable load sensing (Figure 17) and
set Max/Min load thresholds.
In order to change settings, simply press on the green box to
bring up the key pad to edit the values inside.
Figure 16: Hoist setup for select a hoist
Figure 17: Hoist setup for speed and target settings
Figure 18: Hoist setup load sensing screen