Daktronics E SERIES User Manual
Page 13
14
Alarms Screen
The E Series control system will record all drive trips experienced
by any hoist connected to the system during the lifetime of
the installation, and will display (Figure 11) the drive code
associated with the trip in the drive trip history log, which can
record up to 9 trips for each individual hoist drive.
The system Alarms screen displays the status of the limit switch
MAX alarm, load sensing; as well as up to four E-stops.
Whenever an emergency E-stop button is pressed (Figure 12),
the HMI’s screen will flash up the display that an E-stop has been
triggered, and the system Alarms screen indicates which E-stop
was engaged.
Figure 11: Alarms Screen
Figure 12: E-Stop button