Daktronics Sportsound Indoor (SSN-100/150) - Manual (Page 22)

16 Troubleshooting & Replacement Parts
7. Attach all cable ties in place, and then work all around the grille frame assembly,
tightening each cable tie until mesh is taut (Figure 22).
8. Cut off all excess cable tie ends.
9. Reattach top and bottom borders to grille frame assembly.
10. Lift the grille frame assembly back up on the wall and reattach to the sound cabinet.
Note that the DAKTRONICS logo should be at the bottom.
Figure 22: Grille Frame Assembly with New Mesh & Cable Ties
TOP END