Daktronics Sportsound Indoor (SSN-100/150) - Manual (Page 13)

Mechanical Installation 7
Lifting
With the front grille removed, screw the two provided lift eyes
into the top-rear of the cabinet (Figure 8). Use the lift eyes to lift
the sound cabinet to the desired location on the wall.
Note: Daktronics assumes no liability for damages resulting
from incorrect setup or lifting methods. Eyebolts are
intended for lifting only. Do not attempt to permanently
support the cabinet with the eyebolts or eyebolt holes.
Mounting
Reference Drawings:
Shop Drawing; Sound System, SSN-150 ............................................ Drawing C-1132106
Tools Required: 3 /
4
" socket, hammer drill for pre-drilling hole in wall, DD2670874
The rear of the SSN-150 cabinet has two square cutouts that allow it to hang on two steel clip
angles mounted to the wall, 1'-4" apart, with
1 /
2
" hardware. Inside the cabinet, additional 1 /
2
"
hardware passes through the cabinet and into the wall (Figure 9).
Figure 9: Sound Cabinet Mounting
Figure 8: Lift eyes
1. Bolt clip angles to the wall. 2. Hang cabinet on clip angles.
3. Bolt cabinet to the wall
through holes at bottom.
1'- 4"