D-Link DFE-550TX - Manual (Page 17)

D-Link DFE-550TX Adapter
6
Installation
Installation of the DFE-550TX 10/100 NWay Ethernet Adapter
requires installing the hardware first. Once the interface card
has been installed into the host computer, the software can be
installed.
Unpacking
CAUTION: Under ordinary circumstances, a DFE-550TX interface
card will not be affected by static electricity. However, it
is good practice to eliminate static charges by touching
a sizable metal object before handling the adapter
card.
Open the shipping carton and carefully remove all items. In
addition to this User's Guide, ascertain that you have:
•
One DFE-550TX Ethernet Adapter Card.
•
DFE-550TX Software CD-ROM.
•
WOL Cable.
•
Multi Language Installation Guide
Installing the Adapter
1. Shut down the computer, unplug its power cord, and
remove the cover.
2. If your order does not include the Boot ROM option, go
ahead to Step 3. If your order includes the Boot ROM
option, then install the Boot ROM Chip by plugging the chip
into the Boot ROM Socket on the DFE-550TX card. The
notched end of the Boot ROM Chip must be aligned with the
notched end of the Boot ROM Socket. Opposite alignment