Daktronics Configuring the DM-100 Gen III for Gilbarco G-Site/Passport Interface - Manual (Page 4)

Configuring the DM-100 Gen III for Gilbarco
G-Site/Passport Interface Quick Guide Page 4 of 7
DD2294804 Rev 02
13 February 2014 PO Box 5128 201 Daktronics Drive, Brookings, SD 57006-5128
tel: 800-325-8766 fax: 605-697-4700
www.daktronics.com
3. Press ENTER to open Configuration.
LCD Screen Action/Information Shown
Press ENTER to begin editing line information.
Note: The line in Edit mode flashes and shows its line information (L01,
L02, etc.)
Press the Up and Down Arrow keys to move to another sign and line
number.
Press Enter
Press the Up and Down Arrow keys to change the Line Number.
Press ENTER to accept the Address and Line assignments.
Press ENTER to change the appearance of sixes and nines (6 and 9).
Figure 1 shows examples.
Note: For Domestic displays with a nine-tenths digit, the number 3
must show in the first column for the desired format. For International
displays, make sure the number 4 appears in the first column for the
desired format.
Press the Up and Down Arrow keys to toggle through the choices.
Remove tails on sixes and nines, and show 9/10 on the display.
Press the
ENTER key to view the change.
Show tails on sixes and nines, and show 9/10 on the display.
Press the
ENTER key to view the change.
Remove tails from sixes and nines and show only a 9 to represent 9/10
on the display.
Press the
ENTER key to view the change.
Show tails on sixes and nines, and show only a 9 to represent 9/10 on
the display.
Press the
ENTER key to view the change.
Press the SET FUNCTION key to save selection.
CONFIGURATION
LINE MAPPING ↓
SELECT DISPLAY
ADDRESS XX ↑↓
ENT TO COMMIT
ADD XX LIN 0X ↑↓
CONFIGURATION
STYLE ↑
SELECT STYLE
TAILS 9/10 ↑↓
SELECT STYLE
NO TAILS 9/10 ↑↓
SELECT STYLE
NO TAILS 9 ↑↓
SELECT STYLE
TAILS 9 ↑↓
No Tails and 9 Tails and 9/10 No Tails and 9 Tails and 9
Figure 1: Digit Configuration Styles