Daktronics Configuring the DM-100 Gen III for Gilbarco G-Site/Passport Interface - Manual (Page 3)

Configuring the DM-100 Gen III for Gilbarco
G-Site/Passport Interface Quick Guide Page 3 of 7
DD2294804 Rev 02
13 February 2014 PO Box 5128 201 Daktronics Drive, Brookings, SD 57006-5128
tel: 800-325-8766 fax: 605-697-4700
www.daktronics.com
3. Press ENTER to open the POS Settings menu item.
Detect Displays
1. Press the MENU key.
2. Press the Down Arrow key to reach Display Detection.
3. Press ENTER to begin Display Detection.
Configuration
1. Press the MENU key.
2. Press the Down Arrow key to reach Configuration.
LCD Screen Action/Information Shown
Press ENTER.
Use the Down Arrow key to scroll to GSITE/PASSPORT.
Press ENTER.
Each price in the Gilbarco G-Site/Passport interface is identified by
price category, which corresponds to the price assigned to a particular
grade/service level/price level.
Use the Up and Down Arrow keys to select a price category for line 1.
Press MENU and EDIT to modify the line’s price.
Press ENTER to accept the setting. Pressing ENTER when the price
category displayed is NONE causes the price sign to ignore PoS data
for the line. This may be useful for configuring some lines of a display to
receive manual price changes only.
Select a price category for each line and press MENU or CLEAR when
finished. The PoS interface configuration is complete.
When you reach this menu, all lines are configured and PoS
configuration is complete.
POS SETTINGS
ENT TO MODIFY
POS INTERFACE
GSITE/PASSPORT ↓
LINE 1
Price Cat: 1
NONE ↑↓
PRICE CATEGORY: ↓
PRICE LINE 1
CASH PRICE ↑↓
LINE PRICE
1↓ $X.XX 9/10
LCD Screen Action/Information Shown
DETECTING
DISPLAYS...
DETECTED SIGN X
LX