Daktronics 4200 Series Digital Billboard - Manual (Page 7)

3 Display and Control Overview
Section 2: Display and Control Overview
This section describes generic power and signal paths for Daktronics digital billboards. Refer to display
specific signal and riser drawings for component locations on your display.
2.1 Display Control System Flow Overview
Figure 2 shows the location of the ISP enclosure, DMP-8065, and the SmartLink TM power control
device. The control system bay or components may vary slightly by display. Refer to project
specific drawings for your display control location, signal path, and power path.
Figure 2: 4200 Series Control Components