Daktronics 4200 Series Digital Billboard - Manual (Page 20)

16
5.8 Hinging and Removing the ISP Enclosure for Module Access
The ISP enclosure hinges out of the way for module access. It can also be lifted off the of the
hinges. To hinge the ISP enclosure out of the way and lift it off the hinges:
1. Locate the quarter-turn latch at the top of the ISP enclosure.
2. Use a flathead screwdriver, turn the quarter-turn latch counterclockwise until the ISP
enclosure disengages.
3. Pull the ISP enclosure from the right to hinge it out of the way.
4. If needed, carefully lift the ISP enclosure off of the hinges on and set aside while ensuring
power and signal cables do not get pinched.
5.9 Hinging and Removing the DMP-8065 for Module Access
The DMP-8065 hinges out of the way for module access. It can also be lifted off the of the hinges.
To hinge the DMP-8065 out of the way and lift it off the hinges:
1. Locate the quarter-turn latch at the top of the DMP-8065.
2. Use a flathead screwdriver, turn the quarter-turn latch counter-clock wise until the DMP-
8065 disengages.
3. Pull the DMP-8065 from the right to hinge it out of the way.
4. If needed, carefully lift the DMP-8065 off of the hinges and set aside while ensuring
power and signal cables do not get pinched.
Module Testing and Removal