beautypg.com

Daktronics BB-2102 Tuff Sport Four-Sided Basketball LED Scoreboard User Manual

Page 28

background image

22

Maintenance & Troubleshooting

Problem

Possible Cause

Solution/Items to Check

Move the console 20-30 feet from

the scoreboard and test again.

Verify that both the console and

scoreboard antennae are securely

tightened and in a vertical position.

Replace the radio receiver.

No signal to driver

Check that the scoreboard is

receiving 120 (or 230) VAC power.

Check that the red DS2 LED on the

driver lights up when sending

commands from the control console

(see Section

5.4).

Swap the driver with one known to

work correctly and with the same

part number to verify the problem.

Replace if necessary (see Section
5.4).

No power to driver

Check that the green DS1 LED on

the driver is always lit up when the

scoreboard is powered on

(see Section

5.4).

Scoreboard digits light, but

not in the correct order

Incorrect sport code

Ensure the correct sport code is

being used for the scoreboard

model. Refer to the control console

operation manual (see Section

1.1).

Incorrect driver address

Check that the scoreboard driver(s)

are set to the correct address(es)

(see Section

5.4).

Scoreboard digits light,

console works, but no

display on scoreboard

No wired signal from console

(See solution on previous page)

No radio signal from console

(See solution on previous page)

Bad/damaged wiring

Check that the red DS2 LED on the

driver lights up when sending

commands from the control console

(see Section

5.4).

Scoreboard works, but some

LEDs always stay on

Short in digit or indicator circuit

Swap the digit/indicator with one

known to work correctly to verify the

problem. Replace if necessary (see

Section

5.3).

Scoreboard works, but some

LEDs do not light or they

blink

Bad connection

Verify the power/signal connector on

the back of the digit circuit board is

secure (see Section

5.3).

Bad digit or driver

Swap the digit/driver with one known

to work correctly to verify the

problem. Replace if necessary

(see Section

5.3 for digits or

Section

5.4 for drivers).

This manual is related to the following products: