Daktronics SW-2101 Aquatics/Track LED Scoreboard - Manual (Page 7)

Introduction 1
Section 1: Introduction
This manual explains the installation and maintenance of Daktronics Aquatics/Track LED Scoreboards.
For additional information regarding the safety, installation, operation, or service of these displays,
refer to the Daktronics Customer Service contact information in Section 5. This manual is not specific to
a particular installation.
IMPORTANT SAFEGUARDS:
 Read and understand all instructions before beginning the installation process.
 Disconnect display power when not in use or when servicing.
 Disconnect display power before servicing power supplies to avoid electrical shock.
Power supplies run on high voltage and may cause physical injury if touched
while powered.
 Do not modify the scoreboard structure or attach any panels or coverings to the
scoreboard without the express written consent of Daktronics.
 Do not disassemble control equipment or electronic controls of the display; failure to
follow this safeguard will make the warranty null and void.
 Do not drop control equipment or allow it to get wet.
Project-specific information takes precedence over any other general information found in
this manual. Such information may include:
 Shop Drawings: describe mounting methods to structural elements, access method
(front or rear), and power and signal entrance points
 System Risers: describe power and signal connections between display components
and the control location; may also include control room layout and schematic
Ensure all applicable material has been gathered before beginning the installation. Contact a
Daktronics sales coordinator or project manager.
1.1 Specifications Label
Power specifications as well as serial and model number information can be found on the ID
label on the display, similar to that shown in Figure 1.
Please have the assembly number, model number, and the date manufactured on hand when
calling Daktronics customer service to ensure the request is serviced as quickly as possible.
Knowing the facility name and/or job number will also be helpful.
Figure 1: Specifications Label