Daktronics TI-2031 4-Inch LED Bar-Digit Locker Room Clock - Manual (Page 8)

2 Introduction
1.2 Daktronics Nomenclature
Most components within this display carry a white label that lists the part number of the unit.
If a component is not found in the Replacement Parts List in Section 3.3, use the label to order
a replacement. Figure 3 illustrates a typical label. The part number is in bold.
Main Component Labels
Part Type
Part Number
Individual circuit board 0P-XXXX-XXXX
Assembly; a collection of circuit boards 0A-XXXX-XXXX
Wire or cable W-XXXX
Fuse F-XXXX
Transformer T-XXXX
Metal part M-XXX
Fabricated metal assembly 0S-XXXXXX
Specially ordered part PR-XXXXX-X
Accessory Labels
Component
Label
Termination block for power
or signal cable TBXX
Grounding point EXX
Power or signal jack JXX
Power or signal plug for the
opposite jack PXX
Following the Replacement Parts List is the Daktronics Exchange Policy and the Repair &
Return Program. Refer to these instructions if replacing or repairing any display component.
1.3 Control Consoles
Daktronics locker room clocks are typically controlled by the same control console as the
scoreboard(s) in the facility. Refer to Drawing A-102198 for an example of how all the
equipment works together. The locker room clocks are designed for use with All Sport
® 1600,
4000, 5000 or 5500 series consoles. Refer to the following manuals for operating instructions:
Model Control Console
TI-2031
All Sport 5000 Series Control Console Operation Manual (ED-11976)
All Sport 4000 Series Control Console Operation Manual (ED-9999)
All Sport 1600 Series Control Console Operation Manual (ED-12462)
TI-3031 All Sport 5500 Series Control Console Operations Manual (ED-16809)
All manuals are available online at http://www.daktronics.com/manuals .
Figure 2: Scoreboard ID Label
Figure 3: Typical Label