CREATOR CROSS Series - Manual (Page 16)

CREATOR CHINA 2013-08 WWW.CREATOR1997.COM
CROSS Series Mixed Matrix Switcher User 's Manual 10 CROSS Series Mixed Matrix Switcher User 's Manual
2.4.7 The Connection between Matrix
and Extended Keyboard
Connect the matrix controller KEYBOARD
interfaces with matrix interfaces of extended
keyboard MCP100 one by one according to silk
screen with line, you can control the matrix.
Details can be found in CR-MCP100 matrix
keyboard user’s manual.
2.4.8 Matrix Network Interface
2.4.8.1 Hardware Connection
Matrix connects to Ethernet adapter hardware in
two ways:
1) Cross-connection
Matrix directly connects to control computers via
CAT-5 crossover cable.
2)Direct connection method
Matrix connects to an Ethernet switcher or hub
via CAT-5 straight-through cable.
2.4.8.2 Connection Description of RJ45
Network Port Direct Line and Cross-line:
The system adopts the CAT-5 (super 5 cable) as
the wire. Install RJ45 connector (commonly
known as crystal head) at both ends of the CAT-5
to connect network devices. The standard
connection
of twisted pair cable is not
predetermined. The purpose is to ensure the
symmetry of the layout of cable splice, so you can
make the interference between the joint inner
cables cancel each other. General UTP line has
four pairs of twisted thin line, and marked with
different colors.
Twisted pair line has two configurations: EIA / TIA
568B
standard and EIA / TIA 568A
standard.
T568A linear order
1 2 3 4 5 6 7 8
whi
te
gre
en
gre
en
Wh
ite
ora
nge
blu
e
Wh
ite
blu
e
ora
nge
Wh
ite
bro
wn
bro
wn