Denon DRA-F100 - Manual (Page 10)

ENGLISH
Remote Control Unit Part Names and Functions
MD operation buttons
1 (play) button
Press this button to start playback.
2 (stop) button
Press this button to stop playback.
8 and 9 (automatic search buttons)
Use these buttons to search for the beginning of
the desired track.
Cassette deck operation buttons
2 (stop) button
Press this button to stop the tape.
1 (forward play) button
Press this to start playback or
recording in the forward direction.
0 (reverse play) button
Press this to start playback or
recording in the reverse direction.
Cassette deck operation buttons
• REC/REC MUTE button
To start recording from the stop
mode, press this button, then
press 1.
When this button is pressed
during the recording, a blank
section of approximately
5 seconds is created, after which
the recording standby mode is set.
6 (rewind) button
Press this button to rewind the
tape.
Press this button during playback
to set the music search mode (to
find the beginning of selections).
7 (fast-forward) button
Press this button to fast-forward
the tape.
Press this button during playback
to set the music search mode (to
find the beginning of selections).
RESET button
Press this button to reset the tape
counter to ”
“.
CD player operation buttons
DIRECT button
Press this button for direct search
on the CD player.
6 and 7
(manual search) buttons
Press these buttons during
playback to move quickly forward
or backward.
REPEAT button
Press this button for repeat
playback.
RANDOM button
Press this button to play the tracks
in random order.
PROGRAM button
Press this button for programmed
playback on the CD player.
CANCEL button
Press this button to clear the last
track from the program.
TIME/SIDE A/B button
• TIME
Press this button during the play
or pause mode to switch the
time display.
Normally the elapsed time for
the track currently playing is
displayed. When this button is
pressed, the display switches to
the remaining time for that track,
the total remaining time on the
disc, then back to the elapsed
time per track.
During programmed playback,
the total remaining time display
indicates the total remaining
time of the programmed tracks.
CD operation buttons
2 (stop) button
Press this button to stop playback.
1 (play) button
Press this button to start playback.
8 and 9
(automatic search buttons)
Use these buttons to search for
the beginning of the desired track.
Press this button to switch the
input (function).
The input changes in the
followingorder each time this
button is pressed: CD, TAPE,
TUNER, PHONO, MD, AUX.
POWER operation switch
Use this switch to turn on the
power of the entire system or set
the power to the standby mode.
SLEEP button
Press this button to set the sleep
timer.
PRESET buttons
Use these buttons to recall preset
stations on the tuner.
When the PRESET UP or DOWN
button on the remote control unit
is pressed while in the standby
mode, the power turns on and the
receiver begins operating.
BAND (AM/FM) selector button
TUNING buttons
MEMO button
Press these buttons after pressing
the TUNER button to recall preset
stations.
When playing a CD, press these
buttons after pressing the DIRECT
or PROGRAM button to specify
the desired track.
FUNCTION selector button
Press this button to switch the
function to the tuner and to recall
preset stations from the remote
control unit using the number
buttons.
TUNER button
Use these to adjust the volume.
The volume increases when the •
button is pressed and decreases
when the ª button is pressed.
VOLUME buttons
Number buttons
POWER
SLEEP
EDIT RANDOM REPEAT
RESET REC / MUTE
TIME SIDE A/B
PROGRAM CANCEL DIRECT TUNER FUNCTION
1 2 3 4 5
6 7 8 9 10
PRESET
TUNING
MEMO
BAND
VOLUME
+10
8 9
8 9
2
2
1
2 1
6 7
6 7
0 1
B
REMOTE CONTROL UNIT RC-829
DECK
POWER
SLEEP
EDIT RANDOM REPEAT
RESET REC / MUTE
TIME SIDE A/B
PROGRAM CANCEL DIRECT TUNER FUNCTION
1 2 3 4 5
6 7 8 9 10
PRESET
TUNING
MEMO
BAND
VOLUME
+10
8 9
8 9
2
2
1
2 1
6 7
6 7
0 1
B
REMOTE CONTROL UNIT RC-829
DECK
10