D-Link VOIP TA DVG-5112S - Manual (Page 49)

DVG-5112S User’s Manual
D-Link Systems, Inc. 49
Save Settings
After completing all of your settings, dial 509 (Save Settings). Wait for about three seconds, you should hear
a confirmation tone “1.” You can now hang up the phone. Please reboot the gateway to enable the new
settings.
To inquire about the current gateway WAN Port IP address setting
After completing all your settings, dial 101. The system will repeat the current WAN Port IP address. If the
system does not repeat the IP address, this indicates that the gateway is not currently connected to the
Internet. Please check to be certain that the cable connection, account number, and password are all
correct.
IVR Functions Table:
Function
Code
Description Example / Notes
111/101 WAN Port IP address Set/Query
112/102 WAN Port Subnet Mask Set/Query
113/103 WAN Port Default Gateway Set/Query
114/104 Current Network IP Access Set/Query (1: Static IP, 2: DHCP, 3: PPPoE)
First, use function code 114 to select
1 for a Static IP connection then
setup the IP address.
115/105 DNS IP address Set/Query
116/106 Phone Book manager IP address Set/Query
117/107
Set/Query whether or not to use a Public Telephone Book
(0: Disable 1: Enable)
199/099
Set/Query whether or not this gateway acts as the Phone Book
manager (0: Disable 1: Enable)
066 Querying the connection to Phone Book manager
118 Restart
121 Setup PPPoE Account
122 Set PPPoE Password
Use function code 114 to select 3 for
a PPPoE connection.
123 Set NAT IP address
124 Uses NAT (0: Disable 1: Enable)
311/301 LAN Port IP Set/Query
312/302 LAN Port Subnet Mask Set/Query
109 Restore factory default IP address configuration
A static IP address for WAN Port
IP：192.168.1.2
Mask：255.255.255.0
Gateway：192.168.1.254
409 Restore factory default settings
509 Save settings
900
Set the IVR and the language used on the Web GUI
(1: English, 2: Traditional Chinese, 3: Simplified Chinese)
209 Software Upgrade