D-Link VOIP TA DVG-5112S - Manual (Page 25)

DVG-5112S User’s Manual
D-Link Systems, Inc. 25
3-9 Caller ID
FXS Caller ID Generation: Select this option to enable the caller ID display function on FXS ports.
When enabled, the caller’s phone number will be displayed on your phone set when the call comes
through. FSK is preferred in some countries.
FSK Caller ID Type: Bellcore is used in Australia caller ID standards.
3-10 Hot Line
Enable: Enable a line; if some lines are not used, disable them (Pause Function) to avoid unnecessary
waiting when an incoming call is diverting to this line.
Hot Line: When the user picks up the phone, the gateway automatically dials your assigned hotline
number. When in hotline mode, other phone numbers cannot be dialed.
Hot Line No.: Enter the hot line number for an automatic dialing function.
Warm Line: When the Warm Line function is in use, user can dial a number. Otherwise the system will
divert incoming calls from an outside line to the Hot Line Number after a set wait time.