2 specifications, Electrical, Environmental – Contemporary Control Systems BASrouter Portable Installation Guide (Firmware 2.6.x) User Manual
Page 5: Functional, Electromagnetic compatibility
![background image](https://www.manualsdir.com/files/779064/content/doc005.png)
TD070210-0IG
5
2 Specifications
Electrical
INPUT
USB (Type B Port)
Voltage
(V, nominal)
:
5 VDC
Current
(mA, typical)
:
300
Power:
2.5 W
Environmental
Operating temperature:
0°C to 60°C
Storage temperature:
–40°C to +85°C
Relative humidity:
10–95%, non-condensing
Functional
Ethernet
MS/TP
Signalling:
10BASE-T
EIA-485
100BASE-TX
(ANSI/ASHRAE 135-2008)
Cable length limit:
100 m
1200 m (for AWG 18)
MS/TP Baud rate (bps):
9600, 19200, 38400, 76800
MS/TP node limit:
254 devices total
31 full-load devices per segment
MS/TP LED:
flashing green = receive valid activity
Ethernet LED:
green = 100 Mbps
yellow = 10 Mbps
flashing = activity
Regulatory Compliance
CE Mark; RoHS; CFR47, Part 15 Class A
Electromagnetic Compatibility
Each unit complies with Class A radiated and conducted emissions as
defined by EN55022 and CFR 47, Part 15. This equipment is intended
for use in non-residential areas.
Warning This is a Class A product as defined in EN55022. In a domestic
environment this product may cause radio interference in which case the user
may be required to take adequate measures.