Contemporary Control Systems BASgatewayLX - Manual (Page 3)

td100300-0Id
3
speCIfICAtIons
Electrical
(± 10%)
Input voltage:
24 V 24 V
Input power:
6 W 10 VA
Input frequency:
N/A 47–63 Hz
(Intended for use with Class 2 circuits only.)
Communications
Compliance IEEE 802.3 Modbus V1.02
Protocols supported Modbus TCP RTU Master
BACnet/IP ASCII Master
Data rate 10 Mbps, 100 Mbps 2.4, 4.8 9.6, 19.2, 38.4,
57.6, 76.8, 115.2 kbps
Physical layer 10BASE-T, 100BASE-TX EIA-485, 3-wire isolated
Cable length 100 m (max) 1200 m (max)
Port connector Shielded RJ-45 5-pin removable terminal
LEDs l (link) d (duplex) tx rx
Green=100 Mbps Green=Full-duplex Green=Activity Green=Activity
Yellow=10 Mbps Off=Half-duplex
Flash=Activity Flash=Collision
Protocol Compliance
BACnet/IP:
ASHRAE 135-2004, Annex J, B-ASC Profile
Modbus TCP:
Modbus Appl. Protocol Spec. V1.1b, Dec. 28, 2006
(modbus.org) Modbus Messaging on TCP/IP Impl. Guide V1.0b, Oct. 24, 2006
Modbus Serial:
Modbus over Serial Line Spec. and Implementation Guide V1.02b, Dec. 20, 2006
(modbus.org)
Mounting TS-35 DIN-rail
Shipping Weight 1 lb. (.45 kg)
Regulatory Compliance
CE Mark — CFR 47, Part 15 Class A — RoHS
UL 508, C22.2 No. 142-M1987
eIA-485 ethernet
AC dC