Dhcp information - dhcp information – ConnectGear GP-10P User Manual
Page 72
User's Manual
z
IP Address: specifies the IP address of PrintSir itself.
z
Starting IP: specifies the starting IP address for assigning to
DHCP clients.
z
IP range: specifies how many IP addresses are available to DHCP
clients.
z
Gateway IP: gives the IP address of the default gateway.
z
Netmask: gives the network mask.
z
DNS server: gives the IP address of the domain name server.
z
The Write button: save the configuration to the PrintSir.
z
The Reset button: reset the PrintSir to let the changes take effect.
7.13
DHCP Information - DHCP Information
The DHCP Information page can be used to display the DHCP server
information when the PrintSir is with DHCP server function.
z
The status: displays if the PrintSir acts as DHCP server or not.
z
Starting IP: displays the starting IP address for assigning to
DHCP clients.