Printsir cfg - printsir network ability setting, Restore default - restore to default – ConnectGear GP-10P User Manual
Page 69
User's Manual
7.9
PrintSir Cfg - PrintSir Network Ability Setting
The PrintSir Cfg page allows you to set:
z
The Diagnostic Printout, which determines whether or not a
diagnostic printout should be printed on the printer to which the
PrintSir is connected.
z
The TCP/IP Support, which determines whether or not TCP/IP
network printing is supported
z
The NetWare Support, which determines whether or not NetWare
network printing is supported
z
The NetBEUI Support, which determines whether or not NetBEUI
network printing is supported
z
The Write button: save the configuration to the PrintSir.
z
The Reset button: reset the PrintSir to let the changes take effect.
7.10
Restore Default - Restore to Default