ConnectGear GP-10P - Manual (Page 49)

User's Manual
4. Choose NetWare Configuration from the menu.
5. Select Remote Printer in the Printing mode field.
6. Type the print server‘s name in the Print server field. The print
server will be serviced by the PrintSir that is being configured
as a remote printer now.
7. Type the printer number assigned in PCONSOLE in the Printer
Number field.
8. Press Escape to exit the NetWare Configuration screen, confirm
that the changes should be saved, and exit PSETUP.
9. At this point the PrintSir setup is complete.
10. Reset the PrintSir to have the changes take effect.
5.3 NetWare 4.x/5.x Installation & Setup
This chapter tells how to configure your PrintSir for operation with
NetWare 4.x/5.x file servers and clients using NDS (NetWare Directory
Services). If you need to install NetWare 4.x/5.x bindary mode network
printing, please refer to the previous chapter. The installation procedure is
the same as NetWare 3.x.