ConnectGear GR-104 - Manual (Page 49)

49
Parameters
Description
Internet Connection
This page displays whether the WAN port is connected to a
Cable/DSL connection. It also displays the router’s WAN port:
WAN IP address, Subnet Mask, and ISP Gateway as well as
the Primary DNS and Secondary DNS being used.
Note: When the WAN port is a Dynamic IP connection, the
<Release> and <Renew> button will release the Broadband
router’s WAN IP address and renew will get another IP address
from the DHCP server. If the WAN port uses PPPoE, <Release >
will disconnect the PPP session, and <Renew> will initialize
another PPP session.
3.3 Device Status
View the Broadband router’s current configuration settings. The Device Status displays the
configuration settings you’ve configured in the Quick Setup Wizard/General Setup section.