Comtech EF Data CDM-500 - Manual (Page 53)

Front Panel Operation CDM-500 Closed Network Satellite Modem
6–24 Rev. 1.3
Select the location to load a configuration from, using the UP/DOWN arrow keys, then
press Enter. Locations 1 through 10 are available.
If the selected location contains valid data, the following screen will
be displayed:
THE NEW CONFIGURATION
HAS BEEN LOADED (ENTER)
Press ENTER or CLEAR to return to the previous menu.
If, however, the selected location does not contain valid data, the following screen will be
displayed:
WARNING! LOC 10 CONTAINS
NO DATA! (ENTER)
Press ENTER or CLEAR to return to the previous menu.