Comtech EF Data CRS-100 - Manual (Page 17)

2–1
Chapter 2. INSTALLATION
2.1 Unpacking
Inspect shipping containers for damage. If shipping containers are damaged, they should be kept
until the contents of the shipment have been carefully inspected and checked for normal
operation.
Remove the packing list from the outside of the shipping carton. Open the carton and remove the
contents, checking the contents against the packing list. Verify completeness of the shipment and
that the unit functions correctly. If damage is evident, contact the carrier and Comtech EF Data
immediately and submit a damage report. Be sure to keep all shipping materials for the carrier's
inspection.
If the unit needs to be returned to Comtech EF Data, please use the original shipping container.
2.2 Mounting
The CRS-100 is designed to be self-supporting at the rear of the two CDM-500/550/550T modems
which it is connected to. The two data cables (Comtech EF Data Part Number CA/WR0056)
provide this support, but in most rack installations additional support can be provided by physically
anchoring the connecting cables.