Comtech EF Data Ku-Band Power Amplifier with Optional L-Band - Manual (Page 25)

3–1
Chapter 3. Operation
3.1 Operation
The ODPA is a stand-alone terminal. The user can monitor and control some of the
parameters, such as:
• RF Mute: On/Off => Turn the Ku-Band SSPA On/Off
• SSPA Fault Monitor
3.2 M&C Pinout Configuration
Pin # Description Remarks
G -*-
Mute
Control / Monitor Pin:
For control, pull pin to GND to mute, unit
has an internal pull-up resistor.
For Monitor, pin will be pulled to GND by
the SSPA’s M&C if a fault is present.
H GND
J GND
K GND
Note: Any pin not specified is factory use only.