Compuprint 6314 CZL - Manual (Page 45)

CZL – Programmer Manual
45
~JL (Set Label Length)
This command, unlike the previous command ~JC, only measures the length of the label being
used.
3.2.3 Cancel commands
~JA (Cancel All)
This command terminates printing of the current label and deletes the rest from the command
buffer, as if the user had pressed the CANCEL button.
~JP (Pause and Cancel Format)
Similarly to the ~JA command above, this command cancels the current job and places the printer in
pause. This command has the same effect as pressing the CANCEL button without pausing the
printer.
~JX (Cancel Current Partially Input Format)
This command cancels the label that is being sent to the printer without affecting the others (e.g. the
one currently being printed).
3.2.4 Control commands
~PH o ^PH (Slew to Home Position)
This command pushes out a blank label just like the FEED button. ~PH works after the current
label is printed or when the printer is paused. ^PH is sent after completion of the entire label
printing job.
~PP o ^PP (Programmable Pause)
~PP pauses the printer after the current label is printed. ^PP pauses it after the entire label printing
job is completed. In both cases, the printer remains in pause until the ON LINE button is pressed or
another ~PS command is received.
~PS (Print Start)
This command brings the printer back on line after a ~PP or ^PP is sent, just as if the ON LINE
button were pressed on the control panel.