Graphic objects, 7 graphic, Objects – Compuprint 6314 CZL User Manual
Page 29: 1 boxes, Gbl,a,s,c (graphic box), 7 graphic objects, If not. p is the letter y ( yes ) or n, And 9999, And ex presses the width (in dots, Of the box . a is a whole number between 0
CZL – Programmer Manual
29
by the ratio), it could be wrongly interpreted by the reader. In any event, the part that is included in
the useful printing area is printed.
r is a letter that determines the rotation of the bar-code. It can assume the following values:
N: normal rotation (0°)
R: rotated (90°)
I: inverted (180°)
B: bottom up rotation (270°)
a is a whole number between 1 and 9999
and indicates the height of the bar-code, expressed in
dots
h is the letter Y if printing of the human readable field is desired, N
123
if not.
p is the letter Y (yes) or N
124
(no). If the human readable field is desired (when h=Y) it is possible to
position it above (p=Y) or below (p=N).
3.1.7 Graphic objects
3.1.7.1 Boxes
^GBl,a,s,c (Graphic Box)
This command makes it possible to draw boxes and/or lines that can mark off or highlight parts of
the label.
l is a whole number between 0
and 9999
126
and expresses the width (in dots
127
a is a whole number between 0
and 9999
and expresses the height (in dots
130
and 9999
and expresses the thickness (in dots
133
) of the box or
line.
c is letter B
134
when black lines are desired and W when white lines are desired. This latter choice is
useful when you want to draw a white box inside a black rectangle without using the reverse
function.
120
The default value is that of the last ^FW command (page 10) received.
121
The default value is that of the last ^BY command (page 19) received.
122
See note 5 on page 9.
123
Default value.
124
Default value. If the UCC Case mode is used, the default value is Y.
125
Default value. When the width is 0 the box becomes a line of height a and thickness s.
126
See note 4 on page 9.
127
See note 5 on page 9.
128
Default value. When the width is 0 the box becomes a line of width l and thickness s.
129
See note 4 on page 9.
130
See note 5 on page 9.
131
Default value.
132
See note 4 on page 9.
133
See note 5 on page 9.
134
Default value.