Datalogic Scanning 9500 - Manual (Page 13)

Product Reference Guide
1-1
Chapter 1
Introduction
This Product Reference Guide contains comprehensive instructions on
how to install the scanner or scanner/scale (either model may be termed
“scanner” for the purpose of simplicity in this manual), how to program it
using special programming feature bar code labels, and advanced user
information as described in the following overview.
Manual Overview
Chapter 1 , Introduction , presents the manual’s contents, describes features
and specifications, provides regulatory and safety information, and lists
the bar code symbologies the scanner will read.
Chapter 2 , Site Preparation and Installation , supplies physical dimensions
for the scanner or scanner/scale and its most common accessories, and
details counter preparation and installation. Cable routing, connection
and testing are also explained in this chapter.
Chapter 3 , Operation and Maintenance , describes use and maintenance;
providing details about operator controls, programming and diagnostic
modes, scale “zeroing” and calibration. Scanner and scale routine mainte-
nance are outlined in this chapter as well.
Chapter 4 , Problem Isolation , provides an outline of three scanner/scale
test modes: Selftest, Operational Tests and Diagnostic Tests. Descriptions
of the error indications if the scanner detects a system problem and trou-
bleshooting flowcharts to aid in problem resolution are also presented.
Chapter 5 , Calibration , explains scale calibration and verification proce-
dures, including procedures for calibrating the scale in pounds as well as
kilograms.