Code Blue IA4100 SINGLE BUTTON ANALOG SPEAKERPHONE - Manual (Page 17)

Code Blue • 259 Hedcor Street • Holland, MI 49423 USA • 800.205.7186 • www.codeblue.com GU-139-J page 17 of 29
IA4100
Administrator Guide
12.3 Programming Commands
Programming a Phone Number to Dial
Command Explanation Format
01 Phone #1 RED button 01#
02 Phone #2 RED button 02#
03 Phone #3 RED button 03#
04 Phone #1 BLACK button 04#
05 Phone #2 BLACK button 05#
06 Phone #3 BLACK button 06#
07 Loss of power phone number 07#
08 Loss of battery phone number 08#
09 PAS Fault phone number 09#
Programming for Hot Line (Ring-Down)
NOTES: HOT LINE (aka ring-down) – If the IA4100 is connected to a private line, automatic ring-down or “hotline,” all
phone number locations 01 through 09 must be cleared, with 99Ý99# so no phone number will be dialed.
Call the extension or phone number of CB Unit, after the RFA tone:
12583# programming mode
99Ý99# defaults phone / full reset
57# trains the phone on the local loop
5000# programs the phone for ringdown
Ý # hang up and exit programming
If messages are required see section 3.
The maximum number of digits including Ý and # is 45.
A one-second pause when entering phone num bers is the Ý (star) symbol.
Continued on next page)