Code CR4405 - Manual (Page 15)

15
D018433_02_CR4405_User_Manual
23.0 - CR4405 Maintentance
24.0 - Warranty*
The CR4405 needs only minimum maintenance to operate. The tips below for maintenance suggestions.
Enhancing the CR4405’s Touchscreen Capacitive Cover
The CR4405 contains a transparent capacitive cover that helps protect the iPhone and seals out moisture and debris. The cover is resistant
to abrasion, corrosion, thermal exposure and impact. A scratch resistant material is also applied to both sides of the cover during the
manufacturing process. The cover is tightly stretched and attached to the sled case to provide ruggedness and trouble-free touch response
from the iPhone’s screen. For best operation, caution should be taken to ensure that the iPhone screen is free from dirt, oils, and additional
protective covers (e.g. mylar stickers).
Cleaning the CR4405
The CR4405 window should be clean to allow the best performance of the device. The window is the clear plastic piece inside the head of
the reader. Avoid touching the window. Your CR4405 uses CMOS technology that is much like a digital camera. A dirty window may stop the
CR4405 from reading barcodes.
If the window becomes dirty, clean it with a soft, non-abrasive cloth or a facial tissue (no lotions or additives) that has been moistened with
water. A mild detergent may be used to clean the window, but the window should be wiped with a water moistened cloth or tissue after using
the detergent.
Technical Support and Returns
To modify any default settings, download the CR4405 Configuration Guide at www.codecorp.com/files.php and scan the appropriate barcode.
For user specific configurations, visit www.codecorp.com/codesupport.php.
For all returns Code will issue an RMA number which must be placed on the packing slip when the reader is returned.
Visit www.codecorp.com/codesupport.php for more information.
The CR4405, Charging Stations and Batteries carry a one year limited warranty as described herein.
Limited Warranty
Code warrants each Code product against defects in materials and workmanship under normal use for the Warranty Coverage Term applicable
to the product as described at www.codecorp.com/legal/warranty/term.php. If a hardware defect arises and a valid warranty claim is received
by Code during the Warranty Coverage Term, Code will either: i) repair a hardware defect at no charge, using new parts or parts equivalent
to new in performance and reliability; ii) replace the Code product with a product that is new or refurbished product with equivalent
functionality and performance, which may include replacing a product that is no longer available with a newer model product; or ii) in the
case of failure with any software, including embedded software included in any Code product, provide a patch, update, or other work around.
All replaced products become the property of Code. All warranty claims must be made using Code’s RMA process.
Exclusions
This warranty does not apply to: i) cosmetic damage, including but not limited to scratches, dents, and broken plastic; ii) damage resulting
from use with non-Code products or peripherals, including batteries, power supplies, cables, and docking station/cradles; iii) damage
resulting from accident, abuse, misuse, flood, fire or other external causes, including damage caused by unusual physical or electrical stress,
immersion in fluids or exposure to cleaning products not approved by Code, puncture, crushing, and incorrect voltage or polarity; iv) damage
resulting from services performed by anyone other than a Code authorized repair facility; v) any product that has been modified or altered;
vi) any product on which the Code serial number has been removed or defaced. If a Code Product is returned under a warranty claim and
Code determines, in Code’s sole discretion, that the warranty remedies do not apply, Code will contact Customer to arrange either: i) repair or
replace the Product; or ii) return the Product to Customer, in each case at Customer’s expense.
*Warranty periods are North America specific.