Code CR4405 User Manual
Page 14
14
D018433_02_CR4405_User_Manual
21.0 - Reader ID and Firmware Version
22.0 - Upgrading the CR4405 Firmware
The CR4405 sled’s firmware can be updated by: 1) Downloading firmware files wirelessly to the sled via CortexMobile, and 2) Downloading
firmware to a PC from http://www.codecorp.com/downloads.php. The firmware can then be loaded on the sled via the provided USB cable con-
nected directly to the PC running CortexTools. The sled must be in USB Downloader Mode. During the firmware upgrade the sled’s upper right
LED will flash yellow. When finished, be sure to unplug the USB cable and return the sled to the communication mode set prior to putting it in
USB Downloader Mode.
Reader ID and Firmware
Xap/
i
0808
0808
none 0020094903
A
06
0
0000
0700090016
0062
0002 cd(13.2.18)
A text string indicating the firmware version and CR4405 ID number will be displayed.
xample: Xap/i06760456none0020094903A0600000070007001600620002 cd(13.2.18) (see below):
To find out the Reader ID and Firmware version, open a text editor program
(i.e., Notepad, Microsoft Word, etc.) and read the Reader ID and Firmware
configuration barcode.
Note: Code will periodically release new firmware for CR4405 readers. For information on latest firmware visit our website at
www.codecorp.com/codesupport.php.
Display
type
Flash file system
version number
Hardware
revision
Hardware type
identifier for
CR4405 is
0012
Boot
application
version
Operating
system kernel
version
Root file
system
version
Decoder version
ASCII TAB
character
Firmware
version
Boot firmware
version
Radio firmware
version
Reader serial
number (ten digits)
Current
execution state
String
output
OEM
identifier
○
○