Cloud Electronics CXL-100T - Manual (Page 5)

CXL Manual v1.0 5
Transformer/Amplifier compatibility
The four models of CXL Series transformers are compatible
with current Cloud products as shown in the table below.
One transformer is required for each amplifier channel to
be connected to a 100/70 V-line loudspeaker system.
TRANSFORMER MODEL
CX-40T
CX-A850 8 channel amplifier
CX-A450 4 channel amplifier
46/50 4 zone mixer-amplifier
36/50
2 zone (+ utility)
mixer amplifier
CX-100T
CX-A6 6 channel amplifier
VTX4120 4 channel amplifier
CXL-200T VTX4240 4 channel amplifier
CXL-400T VTX4400 4 channel amplifier
Discontinued models:
Some CXL Series transformers may also be compatible with
various Cloud amplifiers no longer in production. Please
contact Cloud’s Technical Dept. for advice if you are adding
transformers to older models.
Transformer/Rackmount Housing
compatibility
CXL-800
The CXL-800 is of open construction and is designed
to accommodate up to eight CXL-40T or CXL-100T
transformers (including any mixture of the two types). It is
not suitable for CXL-200T or CXL-400T transformers.
CXL-1600
The CXL-1600 is of more substantial construction, in the
form of a fully sealed enclosure with top and side ventilation
grilles. This design provides a greater degree of safety
protection, as the transformers are fully enclosed, and is
also more suited for the extra weight of the higher power
transformers.
The CXL-1600 can accommodate up to four CXL-200T
or CXL-400T transformers (including a mixture of the
two models), or up to eight CXL-40T or CXL-100Ts
(or a mixture of the two), as per the CXL-800. It is also
possible to fit various other combinations; the table below
summarises the maximum quantity of each transformer type
that may be fitted when the two categories
(CXL-200T/400T and CXL-40T/100T) are mixed:
CXL-1600 TRANSFORMER CAPACITY
CXL-200T or
CXL-400T
CXL-40T or
CXL-100T
4 0
3 1
2 4
1 5
0 8