ChamSys MagicHD - Manual (Page 60)

MagicHD User Manual 52 / 58
Note
Mirroring is not available in all places a "Mirror/Flip" channel appears. In such cases just the first 4 options apply.
10.5.16 Number
The DMX channel value is used as sent, with no decoding.
Note that the media start and end frame parameters use 3 channels. Their range is therefore 0 to 16777215 (2 24 -1). At a typical
frame rate of 30 frames a second, the largest value corresponds to 155 hours, or nearly 6½ days. Although this might seem
excessive, it does mean that points within a media file can be specified with frame accuracy regardless of length or speed.
Values greater than the number of frames in the clip are taken to mean “the end”. i.e. a 200 frame clip will restart at 200 frames,
rather than 6½ days later, if the end frame is left at the default of 16777215.
10.5.17 Physical Effect
Physical effect is usually accompanied by up to 3 additional parameters called FX-1, FX-2 and FX-3.
Value Effect Notes
0 None
1 Shake Gentle FX-1 Horizontal
amplitude Range ±0.1 of screen width
FX-2 Vertical
amplitude Range ±0.1 of screen height
FX-3 Rotation
amplitude Range ±5°
2 Shake FX-1 Horizontal
amplitude Range ±1 screen width
FX-2 Vertical
amplitude Range ±1 screen height
FX-3 Rotation
amplitude Range ±180°
3 Scroll FX-1 Horizontal scroll speed
FX-2 Vertical scroll speed
4 Scroll to Index FX-1 Horizontal index Range 0 to 255/256 of screen width
FX-2 Vertical index Range 0 to 255/256 of screen height
5 Tile FX-1 Horizontal tiles Range 1 to 255
FX-2 Vertical tiles Range 1 to 255
FX-3 Mirroring 0-63 None
64-127 Horizontal mirror
odd tiles
128-191 Vertical mirror
odd tiles
192-255 H+V mirror odd
tiles
Note
Changing between Scroll and Scroll to Index does not reset the position, so they can be combined to give static and moving
scrolls.
10.5.18 Play Mode