ChamSys MagicHD - Manual (Page 20)

MagicHD User Manual 12 / 58
4.2 MagicQ Setup
4.2.1 Combined Version
When MagicHD is launched from MagicQ PC it does not use the network. The connection is direct, within the software. The
media server settings ( setup → VIEW SETTINGS → VIEW SYSTEM → VIEW MEDIA) should be as highlighted in this
screenshot:
Note
The IP address column shows “Local”. To select Local, enter 0 in that cell.
If you have networked MagicHDs patched in the show, you can use the local window to duplicate any one of these: from the
MagicQ PC application menu:
Media Player → Select Player. A dialogue box will pop up listing all the patched MagicHDs:
Note
The players are listed by name: you should ensure that each player has a distinct name.
To change a player’s name, go to setup
→ VIEW SETTINGS → VIEW SYSTEM → VIEW MEDIA.
4.2.2 Stand-alone Version
To connect to a MagicHD using Art-Net, the MagicQ media server settings should be as highlighted in this screenshot: