ChamSys MagicHD - Manual (Page 50)

MagicHD User Manual 42 / 58
The range of each parameter is the full screen width or height, with bottom left at (0,0) and top right at (1,1). Parameter names
match the encoder wheels on MagicQ consoles.
Tip
When setting up keystone it can help to turn on
the HUD grid as shown in these screenshots. The grid also enables keystone
configuration with no media playing.
8.10 HUD Control
The HUD control parameter turns the HUD overlay on and off, and selects which layer’s DMX parameters are displayed. It is a
bitmask, and details are given in the DMX parameter description .
8.11 Audio Volume
This parameter controls the overall volume of audio from all media layers. Audio volume is faded with output layer intensity .
Therefore DBO also kills audio output.
8.12 Physical Effect
This parameter allows a variety of physical effects to be applied to the layer, independently from the Colour Effect . Full details
are in the DMX parameter .