ChamSys MagicHD - Manual (Page 48)

MagicHD User Manual 40 / 58
Chapter 8
Output Layer
The output layer is used to control the overall appearance of the output from MagicHD. The output layer acts on the sum total of
the
media and text layers: they are effectively combined into one resulting image, which the output layer then manipulates.
Note that any setting that puts all or part of the output beyond the limits of the window, screen or projector output will result in
those parts of the output being clipped.
The DMX parameters for the layer allow you to control the following features.
8.1 Intensity
Intensity controls the overall brightness of the MagicHD video output.
Intensity controls the overall volume of the MagicHD audio output.
8.2 Position
Position controls where the MagicHD output appears within the window, screen or projected area.
8.3 Scale
Scale increases or reduces the size of the output.
8.4 Rotation
This parameter allows the output to be rotated within the extent of the window, screen or projected area. The centre point is
controlled by
Position .
8.5 Mirror/Flip
This parameter allows the output to be flipped horizontally, vertically or both.