Operation, Ensémble instructions – Cetacea Sound Ensémble 903 User Manual
Page 8
7
Operation
ENSÉMBLE INSTRUCTIONS
C
Source Inputs
There are three (3) source-input jacks on the Ensémble speaker
base that can use either mono or stereo inputs depending on your
“source”, i.e., computer, VCR, DVD, projectors, microphones, etc.
A
Volume Control
The Ensémble does not have an internal volume control. Use the
volume control on your source or, if required, use the in-line volume
control
B
included in this kit. The right angle plug of the volume
control must be plugged into the “source”. Use the male-to-male
extension cable
C
to fi nish the connection to one of the Ensémble
inputs labeled A, B, or C.
A
Turn Down The Volume
Turn the volume down low on your "source" before making the
power connection.
Turn Off Special Eff ects & Volume
If your source has a BASS BOOST, or special eff ects like Spatializer,
SRS, or controls that say JAZZ, ROCK, BLUES, etc., turn them off
for now.
Diagram
Connect Multimedia Devices
A
B
C
STEREO CABLE
IN-LINE VOLUME CONTROL