Cetacea Sound Astronaut CL Owner's Manual - Manual (Page 18)

17
Installation
POWER CONNECTION
B
Low Voltage Connection
The low power barrel connector J can now be plugged into
the speaker. Plugging / unplugging this connector will turn the
speaker on and off.
STEP 3
Power Up
When the power supply connector barrel is plugged into the
speaker the internal green light K will turn on, indicating the
speaker is on.
Turn on your sound source and adjust the volume.
STEP 2
CAUTION
Make sure all source cables are connected
before plugging in power barrel.
Diagram
J
K
Source Cable
(plug in 1 st )
Power Supply
(plug in 2
nd )