Delphi VITALPOINT II DL-00035 User Manual
Page 32
18
DL-00035 Rev. 4
Measuring Weight
Position the scale close to the monitor.
The monitor will display the following instructions to take a weight measurement:
1. Make sure you are wearing no clothing or similar light clothing
and your shoes are removed.
2. Make sure your bladder is empty.
3. Do not step onto the scale yet.
It is very important that there is no weight on the scale when the weight
sequence is started. This allows the scale to re-zero itself and become
prepared to take your weight.
Press “Continue.”
4. Step on the platform and remain as still as possible without leaning
on anything.
When ready, press “Take Measurement.” When finished, the measurement will
be displayed on the screen in both pounds and kilograms.
If you receive any error codes while taking measurements, follow the instructions
on the screen and contact your clinician.
Measuring ECG
Only a clinician or a patient authorized by their clinician is authorized to perform an
ECG measurement. The measurement will report automatically on the monitor.