Delphi VITALPOINT II DL-00035 - Manual (Page 30)

16
DL-00035 Rev. 4
Measuring Blood Glucose
The monitor will ask you if you wish to use the LifeScan OneTouch ® Ultra ® Blood
Glucose Meter that came with the monitor, or if you want to enter your blood
glucose level manually.
To use the OneTouch ® Ultra ® meter, connect the meter to the appropriate cable
on the monitor and follow the instructions on the screen.
For manually entered information, the monitor will ask you to verify that the
number you entered is correct. (Blood glucose level can be entered in either
mg/dL or mmol/L, depending on personal preference or meter type.)
If you receive any error codes while taking measurements, follow the instructions
on the screen and contact your clinician.
Measuring Prothrombin Time
1. Press “Take Measurements.”
2. Press “Protime.”
The monitor will display the following instructions:
1. Enter your protime reading (as displayed on your meter) per manufacturer’s
instructions.
2. Is this PT (prothrombin time) or INR (internationalized normalized ratio)?
3. Press “Complete” when data is entered.
If you receive any error codes while taking measurements, follow the instructions
on the monitor’s screen and contact your clinician.
PRECAUTION:
FOLLOW THE MANUFACTURER’S INSTRUCTIONS FOR USE WHEN
USING A GLUCOSE METER AND STRIPS.
PRECAUTION:
FOLLOW THE MANUFACTURER’S INSTRUCTIONS FOR USE WHEN
USING A PROTHROMBIN TIME METER.