Caple C770 - Manual (Page 6)

Page 6
C770 user manual.DOC
INSTRUCTIONS FOR THE INSTALLER
IMPORTANT NOTICE
THE OPERATIONS INDICATED BELOW MUST BE FOLLOWED BY QUALIFIED
PERSONNEL EXCLUSIVELY, IN CONFORMITY WITH THE REGULATIONS IN
FORCE.
THE MANUFACTURING FIRM REFUSES ALL RESPONSIBILITY FOR DAMAGES TO
PEOPLE, ANIMALS OR THINGS, RESULTING FROM THE FAILURE TO COMPLY
WITH SUCH PROVISIONS.
Installing the top
The appliance is designed to be embedded into heat-resistant pieces of furniture.
The walls of the pieces of furniture must resist a temperature of 65°C besides the room one.
The equipment must not be installed near inflammable materials, such as curtains, cloths,
etc.
Make a hole in the top of the piece of furniture, with the dimensions indicated in fig.3, at a
distance of at least 50 mm from the appliance border to the adjacent walls.
Any possible wall unit over the cook-top must be placed at a distance of at least 760 mm
from the top. It is advisable to isolate the appliance from the piece of furniture below with a
separator, leaving a depression space of at least 10 mm (fig.4).
APPLIANCE
DIMENSIONS L P
700 x 510 550 470
600 x 510 550 470
290 x 510 268 490