Caple C736GSS User Manual

Page 13

GENERAL TIPS
<

Before cleaning the hob switch if off and wait for it to cool down.

Clean with a cloth, hot water and soap or liquid detergent.

Do not use products which are abrasive, corrosive or chlorine based.

Do not use steel pads.

Do not leave acid or alkaline substances (vinegar, salt, lemon juice, etc.) on the
hob.

ENAMELLED PARTS
<

All the enamelled parts must be washed only with a sponge with soapy water or
other non-abrasive products.

Dry carefully.

STAINLESS STEEL
<

Clean with special products which are available on the market.

Dry preferably with chamois leather.

Note: regular use will cause discolouring around the burners and the electric
hotplate, because of the high temperature.

BURNERS AND GRIDS
<

These pieces can be removed and washed with suitable products.

After cleaning burners and spreaders dry them well and replace them
correctly.

In appliances with electric ignition keep the electrode clean so that the sparks
always strike.

Note: To avoid damage to the electric ignition do not use it when the burners
are not in place.

GAS TAPS
<

Regular lubrication on the gas taps must only be performed by specialised
engineers.

If the gas taps are not working properly call the After-Sales Service.

ELECTRIC HOTPLATES
<

Always clean when the hotplate is tepid.

Use a soft cloth, dampened with water, and a little salt. To finish off, use a soft
cloth with a little oil.

3. CLEANING AND MAINTENANCE