Caple C201 - Manual (Page 27)

27
The oven is now programmed and everything will work automatically.
Referring to the example in Figure 28:
– the oven will come on at 7.00 (end x of the red sector G)
– cooking duration 2 hours
– end of cooking at 9.00 - oven will switch off and the “0” will appear in the window
(E).
When the “0” appears in the window (E) this means that cooking has finished; zero the
function selector and thermostat knob and reset the programmer to manual by rotating
the larger outer knob (B) clockwise until the symbol
appears in the window (E).
Excluding the programmer
To use the oven manually the programmer must be excluded by turning the larger outer
knob (B, Fig. 28) clockwise until the symbol
appears in the window (E, Fig. 28).
Programmer
The semicircular programming window (D) rotates clockwise, operated by the larger
outer knob (B).
The end (x) of the semicircular window (D) is the end of cooking indicator.
The end (y) of the red sector (G), which can be seen by rotating the knob (B) anticlock-
wise, is the beginning of cooking indicator.
The red section (G) shows the cooking time.
When “0” appears in the window (E) this indicates that cooking is finished.
Automatic cooking
(Fig. 8)
If you wish the oven to switch on and off automatically:
1. Set the end of cooking time within a 12 hour range
2. Set the beginning of cooking time (end of cooking time minus cooking time)
3. Set the oven function and temperature.
These operations are carried out as follows:
1. Set the end of cooking time by turning the larger outer knob (B) clockwise until the
end (x) of the semicircular window (D) coincides with the required time.
If you go beyond the required time, you must repeat the whole cycle as it is not pos-
sible to scroll in reverse.
2. Set the beginning of cooking time by rotating the larger knob (B) anticlockwise until
the end (y) of the red sector (G) coincides with the required time.
The red sector (G) indicates the cooking time (max 3 hours 45 minutes) and therefore
the period the oven remains on.
As the cooking time elapses the red sector will rotate together with the clock hand.
3. Set the required cooking function and temperature via the function selector and ther-
mostat knob.
Analogical programmer