Caple CR9201AN - Manual (Page 36)

36
Correct replacement of the burners
It is very important to check that the burner flame distributor F and the cap C has
been correctly positioned (see fig. 8.1-8.2) - failure to do so can cause a poor burner
flame and/or damage to the burner and hob.
Check that the electrode “S” (fig. 8.1) is always clean to ensure trouble-free sparking.
Note:
The electrode “S” must be very carefully cleaned.
Triple ring burner
The triple ring burner must be correctly positioned (see fig. 8.5); the burner rib must
be enter in their logement as shown by the arrow see fig. 8.3).
Then position the cap A and the ring B (fig. 8.4 - 8.5).
The burner correctly positioned must not rotate (fig. 8.4).
Fig. 8.3
Fig. 8.4
A
B
Fig. 8.5