beautypg.com

Safety reminders, Instruction book, Space requirements – Caple CR9201AN User Manual

Page 3: Food splashes, Hot surfaces, The grill and top oven element, Faults, After use, Caple service

background image

3

Safety Reminders

Instruction Book

This appliance should only be used for
it’s intended purpose as described in
these instructions.
Ensure that you fully understand these
instructions before operating this appli-
ance.

Space Requirements

Ensure that the specified ventilation
space around the appliance is not
obstructed.

Food Splashes

Always wipe clean the oven after use.
Food splashes can carry on cooking
next time and may become a fire hazard.

Hot Surfaces

It is important to remember that the sur-
faces of cooking appliances get hot dur-
ing use and retain the heat for some time
after switching off.
It is therefore advisable to keep small
children away from the appliance.

The Grill and Top oven element

Are exposed, so take great care when
placing food in the oven or removing it.
Use the grill pan handles or gloves.

DO NOT

line the oven, grids, trays etc.

with aluminium foil as this could
adversely affect the heating elements
and it could also damage the interior
surfaces.
Do not place baking trays or the drip tray
on the base of the oven chamber.

DO NOT

place flammable materials in

the oven or in the storage compartment.

Faults

Do not continue to use this appliance if
it appears to be faulty.

After Use

After use, ensure that the knobs are in
position ● (off), and close the main gas
delivery valve or the gas cylinder valve.
Switch the oven controls off.

Always switch off at the isolating switch
before cleaning the appliance, or
attempting any maintenance task, or
when not in use for long periods (when
on holiday).

CAPLE Service

To ensure the continued safe and effi-
cient operation of this appliance, we rec-
ommend that any servicing or repairs are
carried out only by an authorised CAPLE
SERVICE ENGINEER.

Before Use

Check that all accessories have been
removed from the oven interior.
Set the temperature to the maximum
position using the temperature control
knob.
Leave on for approximately 30 min-
utes. This will burn off any protective
coating applied to the oven during
manufacture.

The kitchen should be well ventilated
during this time as there may be an
odour given off.

When cool, wash the accessories and
the oven with warm water and mild
detergent.

This manual is related to the following products: